Repair Parts
RIDGID parts are available on-line at store.ridgid.com/wetdry
SERVICING OF DOUBLE-INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry Vac must be identical to the parts they replace.
Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbol
marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.
Key No.
Part Number
1
2
820563-4
3
4
818413-3
5
315534-1
6
7
820563-7
8
9
10
823201-3
11
12
13
14
15
16
17
18
19
* Standard Hardware Item - May Be Purchased Locally
† These replacement parts are available where you purchased your Vac.
16 U.S. Gallon / 60 Liter Wet/Dry Vac
Model Number WD16400
Electrical Rating:
120 V, 9 A, 60 Hz
Always order by Part Number - Not by Key Number
Description
832086
Rocker Switch
*
Screw, Pan Hd. Ty. "AB" 10 x 3/4" (19 mm) Ser.
818961
Spacer
Blower Wheel
Washer
826817
Nut, Hex Flange
*
Screw, Pan Hd. Ty. "AB" 10 x 3/4" (19 mm) Ser.
833185
Collector
509488
Float
Filter Cage
VF4000
Qwik Lock™ Filter
†
73185
Drain Cap
832084
Caster Foot w/Storage
73137
Caster
VT2509
Utility Nozzle
†
VT2520
†
Tug-A-Long Positive Locking Hose with Dual-Flex
VT2508
†
Extension Wand
VT3502
Disposable Filter Bag
†
SP6975
Owner's Manual
WARNING
(square within a square) may also be
14