Checking For Blockages; Maintaining The Brushroll; Maintaining The Soft Roller - Shark Rocket HV380 Serie Manual De Instrucciones

MAINTAINING YOUR VACUUM - Continued
TIP: Ensure the brushroll garage
is completely sealed and closed
before using.
NOTE: Heavy usage over time may
require minimal upkeep in order to
maintain your vacuum's appearance.
15
s h a r kc l e a n . c o m

CHECKING FOR BLOCKAGES

1
Remove the wand from the
handheld portion and check all dust
cup intake openings.
2
Remove the floor nozzle from the
wand and check the wand for
blockages.
3 Tilt neck of floor nozzle back to
straighten the airway. Remove
blockages.

MAINTAINING THE BRUSHROLL

1
Press down on the two buttons
on the floor nozzle to pop up the
brushroll garage lid.
2 Lift the brushroll out by the tab on
the left side. To remove any string,
hair or debris that may be wrapped
around the brushroll, use the onboard
hair removal tool. The tool is located
in a compartment on the nozzle,
above the brushroll.
3 To reinstall the brushroll, return it to
the brushroll garage. Press down on
the brushroll garage lid until you hear
it click into place.

MAINTAINING THE SOFT ROLLER

1
Slide the Soft Roller access button
up to remove the Soft Roller.
2 Use the onboard hair removal tool
to remove any string, carpet fibers
or hair that may be wrapped around
the Soft Roller. The tool is located in
a compartment on the nozzle, above
the brushroll. You can also tap loose
debris off the Soft Roller, or wipe it
clean with a dry towel. If you see any
fibers or hair buildup in the teeth
behind the Soft Roller, take a dry
towel and wipe it away.
Wash the Soft Roller as needed. Use
only water, and let air-dry completely
for at least 24 hours.
3
To reinstall the Soft Roller, press until
you hear it click into place.
s h a r kc l e a n . c o m
16