Glomex DISCOVERY S460S Manual De Instrucciones página 55

6. Fasten the control unit to the wall by using the
provided accessory (bracket) and screws.
Fig. 19
7. As an alternative, it is possible to build in the
control unit by using commercial plates (3-mod-
ule plates) or the GLOMEX accessory (not
included: code 4.010.0432, see Fig. 20) by bor-
ing a hole with a reciprocating saw and using
the drill with 2.5 mm tip (use the template on the
following page for correct dimensions).
8. Connect the 1.5 m coaxial cable to the LNB IN
socket of the satellite receiver (not supplied).
www.glomexmobile.com
53
DISCOVERY S460S
EXPLORER S460M