How To Use The Sleep Mode (If Present) - Glomex DISCOVERY S460S Manual De Instrucciones

DISCOVERY S460S
EXPLORER S460M
7.1 HOW TO USE THE SLEEP MODE (if
present)
The first time you need to select the desired satel-
lite (ASTRA1 or HOTBIRD).
Fig. 26
The antenna will search for the satellite and, after
recognizing it correctly (GREEN light), you can
select the SLEEP position.
Fig. 27
In sleep mode, the antenna will stop and it will not
enter the tracking mode. It means that, if the vehi-
cle moves, the antenna will lose the signal.
Once the antenna is switched off, if the vehicle did
not move, you can switch the antenna on again
directly in sleep mode.
When you move to a different location you have to
switch off the antenna, select the desired satellite
on the control unit, switch on the antenna and it will
search again for it.
Then you can select the SLEEP mode again to
stop the antenna.
When you want to select the other satellite you
have to switch off the antenna, select the desired
satellite on the control unit, switch on the antenna
and it will search again for it.
Then you can select the SLEEP mode again to
stop the antenna.
60
www.glomexmobile.com