Emerson Warm Tiles ES Manual Del Usuario página 53

10.4.3 Sensor Application 2/2
1
1
3
4
2
5
PAGE 53
All Rights Reserved. Used under license by EasyHeat Inc.
Maximum temperature depends on the floor type and temperature unit.
Floor limit temperatures are set under Menu/Installer Settings/Floor Protection.
Note that changes made under "Sensor Application" do not influence the "Floor
Protection" settings.
1. Tap the "Menu" button on the home screen.
2. Then tap the "Installer Settings" button to access the various installer settings.
3. Tap the "Sensor Application" button.
4. Tap the application that you want to use.
• Floor
• Room/Floor Protection
• Room
5. Confirm your choice by tapping the "Accept" button or discard it by tapping the
"Cancel" button.
The thermostat will automatically return to "Installer Settings".
Note that, when changing Sensor Application, certain menu options may be grayed
out and inaccessible as they are not applicable with the current settings.
<
Contents
>