Troubleshooting - Emerson Warm Tiles ES Manual Del Usuario

12. Troubleshooting* 4/5

I CAN'T CONNECT TO MY WIRELESS NETWORK
Problem Solution
I cannot connect to my Some WiFi routers limit the number of wireless devices that can connect to the Internet. To test whether this is the problem,
WiFi router even though shut down one of the other WiFi-enabled devices in your home. Once that device is completely shut down, try once again
there is a good signal* to connect your WiFi Touch Thermostat to the network. If the ESW WiFi ColorTouch connects successfully, consult the
documentation for your access point or contact your Internet Service Provider (ISP) to find out if you can increase the
number of simultaneous connections to your WiFi network.
Maybe your WiFi router The problem might be with your router (even if your other wireless devices are still connected). A simple restart of the router
requires a restart/reboot* will usually resolve such problems. While most routers simply have to be unplugged and then plugged back into their power
source to restart them, you should refer to your router's documentation for specific instructions.
Maybe your WiFi router Contact your ISP or the router manufacturer for instructions on how to update the firmware.
firmware needs to be
updated*
Other devices are Try turning off other wireless devices (Bluetooth, WiFi, wireless phones/cameras) that may cause interference, then test the
interfering with the wireless ESW WiFi ColorTouch network connection.
signal*
PAGE 70
All Rights Reserved. Used under license by EasyHeat Inc.
< >
Contents
*Only applicable for ESW Wifi ColorTouch