Navigation Buttons - Emerson Warm Tiles ES Manual Del Usuario

4.1 Navigation Buttons

PAGE 6
All Rights Reserved. Used under license by EasyHeat Inc.
Accept/Back/Cancel/Arrow Up/Arrow Down/Arrow Left/Arrow Right
Whenever you change a parameter setting, you must tap the "Accept" button for the
thermostat to acknowledge the change.
"Accept" is shown on the screen as "√".
"Back" is shown on the screen as a button marked with a hollow arrow pointing to
the left.
In the various menus and submenus, you will find the "Back" button in the upper
left corner of the touchscreen.
Tap the "Back" button to return to the previous menu.
"Cancel" is shown on the screen as a button marked "X".
Although "Cancel" has the same effect as "Back", it also results in all the unsaved
settings being discarded.
As soon as you leave a home screen and enter one of the menus, either a "Back"
button or a "Cancel" button will be shown.
To return to the home screen, tap Back/Cancel once or multiple times depending
on where you are in the menu structure.
"Arrow Up", "Arrow Down", "Arrow Left", and "Arrow Right" are used to toggle
settings and values and to navigate through the menus. The "Arrow Up" and
"Arrow Down" buttons are accelerated buttons. Holding either of them will make
the value change continuously.
<
Contents
>