Cleaning And Routine Maintenance; Cleaning The Dryer; Technical Specifications - Candy CC2 67 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ofrecido por www.electromanuales.com
40003660Eng.qxd
05/08/2005
To commence the programme press Start and the
appliance will complete the drying cycle at the
end of this time. The 6 or 9 hour indicator light
will flash to indicate that the start delay is in
progress.
Cleaning and Routine
Maintenance

Cleaning the dryer

Clean the filter and empty the water
container after every drying cycle.
Regularly clean the condenser.
After each period of use, wipe the inside of
the drum and leave the door open for a
while to allow circulation of air to dry it.
Wipe the outside of the machine and the
door with a soft cloth.
DO NOT use abrasive pads or cleaning
agents.
To prevent the door sticking or the build up
of fluff periodically clean the inner door and
gasket with a damp cloth.

Technical specifications

Drum capacity
Maximum load
Height
Width
Depth
Energy Label Band
13:54
Page 17
115 litres
7.5 kg
85cm
60cm
60cm
C
WARNING!
The drum, door
and load may be
very hot.
IMPORTANT
Always switch
off and remove
the plug from
the electricity
supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on
the front of the
dryer cabinet
(with the door
open).
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido