General Electric PBM21 Instructivo Y Advertencias página 58

1-HOW TO REMOVE DOOR HANDLE:
Hold the door handle and pull up and slide until
brackets let it free.
NOTE: For Double Door models follow the same
procedure on the opposite door.
Mounting Fasteners
(appearance may vary)
TO INVERT DOOR HANDLE:
-Remove the mounting fasteners (A) with a Phillips
screwdriver, Remove the brackets too and transfer both
to the right side.
-Remove the logo badge. (B)
-Remove and transfer the plug button to the left side of
the fresh food door. (C)
-The accessory bag contains the logo badge to be set on
the left side and the plug button also. This plug must be
placed in the lower hole from the fresh food door.
-Place the handle on the brackets (A) Then slide down
until you heard a click.
A
Mounting Fasteners
(appearance may vary)
B
Badge
C
58
2-HOW TO REMOVE THE DOOR HANDLE FROM
FREEZER:
Hold the handle and pull it to the left side until it
slides and brackets (A) let it free.
A
A