General Electric PBM21 Instructivo Y Advertencias página 62

REMOVE THE REFRIGERATOR DOOR
1
N OTE: For Ice & water model unplug water line from back of
1.6
refrigerator and remove all the tapes that fix the water line.
Remove left hinge cover on top the refrigerator using a
1.7
Phillips screwdriver.
Installation Instructions
Unplug the 3 wire connectors and remove the wires out
1.8
of the way until you can see the screws holding the hinge.
Pull the whole water line very carefully.
1.9
1.10 Using a 5/16" Socket ratcher/driver, remove the screws
securing the top hinge to the cabinet.
Note: Don´t remove the hinge from the door.
62