Introduction; Technical Data - ESAB Origo Arc 250 edw Manual Do Usuário

2

INTRODUCTION

The OrigoArc 250 edw is an e
TIG in direct current (DC) and a generator of electrical current
electrical devices used in construction. The unit have two auxiliary outlets – one three
phase 380 V and one single phase 220 V.
They allow weld carbon steel, alloy steel, stainless steel, cast iron, aluminun and its
alloys, copper and bronze.Welding with electrodes up to 5.0 mm.
The machine is powered by an internal combustion engine, an alternator, control
circuits and instruments for control and operation.
The OrigoArc 250 edw cabinet are strong and easily moved in the working area.
It has fuel saving system that can be used in the process of welding.
3

TECHNICAL DATA

D.C.WELDING
Power
Welding current regulation
Duty cycle
A.C.GENERATOR
Power trifásica/monofásica
Frequency
Duty cycle
ALTERNATOR
Type
Insulation
MOTOR
Make / Model
Type
Displacement/Cylinder
Power
Speed
Fuel/Consumption
Cooling system
Engine oil capacity
Stater
GENERAL SPECIFICATION
Battery
Fuel tank capacity
Autonomy (60% duty cycle)
Protection
Dimensions (Length X Width X Height)
Weight (without fuel)
ngine driven welder for welding with stick electrodes and
11 KW
20 a 250 A
100 %
7,5 KW
60 Hz
100 %
Self-excited/Self-regulated /with brushes
Three-phase/synchronous
H
Honda/GX 670
4 -stroke
2/670 cm3
15.3 KW
3.600 rpm
Gasoline / 7,4 l/hr - 3600 rpm
Forced air
1,4 l
Electric
12 V/45 Ah
45 liters
8 hours
IP 23
1150 X 515 X 870 mm
265 Kg
- 25 -
for tools and other
Honda/GX 690
4 -stroke
2/688 cm3
16.5 KW
3.600 rpm
Gasoline / 6,7 l/hr - 3600 rpm
Forced air
1,7 l
Electric