Setting The Clock - JVC KD-AR260 Manual De Servicio

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds.
"DEMO", "CLOCK H", "CLOCK M", "DIMMER",
or "AMP GAIN" appears on the display.
2
Set the hour.
1 Select "CLOCK H" (hour) if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M" (minute).
2 Adjust the minute.
1
2
2
4
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button, the
display changes as follows:
• During tuner operation:
Frequency
• During CD operation:
Elapsed playing time
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Clock
Clock
9