Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS (Continued)
Numbered Settings
For standard blending, select from one of the numbered settings
between 1 and 10.
Turn the dial to your desired setting between 1 and 10. When in
1.
Vacuum, default will be set to "2:00".
Adjust the time if desired
2.
blending at your selected setting.
Adjust the number setting using the dial at any point while
3.
blending, if needed.
The lowest setting is #1 (5,000 RPM). The highest setting is
•
#10 (27,000 RPM).
Vacuum
By vacuuming the air out of the blender, you can ensure no air is being
mixed with your ingredients during the blending process, maximizing
the nutritional value and ensuring your blender creations will remain
fresher longer.
Follow these steps to take advantage of the unit's vacuum
capabilities BEFORE blending:
Turn the unit on (press red switch on the side of Base. Then press
1.
"Power" button).
Select your desired setting using the dial.
2.
Press "Vacuum ON/OFF". The button will be lit blue.
3.
Press "Start/Stop". The display will flash default time for selected setting.
4.
Unit will remove all air from Jar.
•
Once all air has been removed, unit will automatically
•
start blending.
Example:
Turn dial to Frozen. "0:35" seconds will be displayed.
1.
Press "Vacuum On/Off". The button will be lit blue.
2.
Press "Start/Stop". Once all air has been removed, the blender will
3.
start blending.
Vacuum Only
Follow these steps to take advantage of the unit's vacuum capabilities
AFTER blending:
Turn the dial to "Vacuum Only". "0:00" will be shown on the LCD display.
1.
Press "Start/Stop". The unit will vacuum excess air from the blender, then
2.
automatically power off. The display will show "0:00".
If blending for more than 3 minutes, use Plunger Lid.
1
, then press "Start/Stop" to begin
1
Owner's Manual
17
Publicidad
Tabla de contenido
