Assembly; Before First Use - Sage Nutri Juicer BJE830 Guía Rápida

Assembly

BEFORE FIRST USE

Before using your juicer for the first time,
remove and safely discard any packaging
materials and promotional stickers
and labels.
Ensure the power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly.
1. Place motor base on a flat, dry surface
such as a countertop. Ensure that the
juicer is switched to OFF at the dial,
and the power cord is unplugged.
2. Place filter bowl surround on top of the
motor base.
3. Align the arrows at the base of the
stainless steel filter basket with the arrows
on the motor drive coupling and push
down until it clicks into place to create
a secure fit with the motor base.
6
4. Place the juicer cover over the filter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
filter basket.
5. Raise the safety locking arm up and
locate into the two grooves on either side
of the juicer cover.
6. The safety locking arm should now be in
a vertical position and locked into place
on top of the juicer cover.