Protecting Pictures; Single-Frame Erase - Olympus CAMEDIA D-390 Manual Básico

Playback

Protecting pictures

En
You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-
frame erase function.
1
Press
• The monitor turns on.
2
Use the arrow pad to display the picture you want to protect.
3
Press
• The top menu is displayed.
4
In the top menu, select MODE MENU T PLAY T
í
.
5
Ññ
Press
• To cancel protection, select OFF.

Single-frame erase

Recorded pictures can be erased. There are two types of erase: Single-
frame erase, which erases only the picture that is displayed on the monitor,
and all-frame erase, which erases all the pictures on the card.
1
Press
• The monitor turns on.
2
Use the arrow pad to display the picture you want to erase.
3
Press
• The top menu is displayed.
4
ñ
Press
5
Ññ
Press
• The picture is erased and the menu is closed.
28
with the lens barrier closed.
.
to select ON, then press
.
.
to select .
to select YES, then press
, and press
.
.