Evolution DWP1000 Manual Del Proprietário página 128

OFF
ON
Fig 5
Fig 6
128
®
3. Starting the Evolution Evo-System Engine
The procedure for starting the engine can be found
in the Instruction Manual for the Evolution Engine.
4. Pump Output
Note: Output of the pump is determined by the speed of the
engine and by the length and elevation of the pipe runs.
5. Shutting Down
To shut down pumping operations:
• Stop the Engine by turning the ignition switch to the
'OFF' position. (Fig. 5)
• Close the fuel tap. (Fig. 6)
www.evolutionbuild.com