Logitech X56 HOTAS Manual De Usuario página 16

Settings
The settings page will allow you to alter the deadzone and response curves of all axes on both
the Stick and the Throttle.
Response Curves
Depending on the type of aircraft that you fly, you may want your joystick to be more or less
sensitive around the middle or end points of the axes. For example, if you're flying an F/18
on a refueling mission at 25,000 feet, you will be making very fine movements to get into
the correct position. Having a shallower response curve around the center point of the joystick's
X and Y axes will enable you to make very fine adjustment to your aircraft.
Deadbands
A deadband, sometimes known as a deadzone or neutral zone, is a part of the range in which
an axis moves, undetected by the drivers and without effect on in-game progress. It may be
around the center point of the axis range, or at either end of the axis range.
Axis Range Adjustment
The axis range adjustment, or axis saturation to assign its correct name, allows you to shrink
the raw data range of an axis.
Physical Axis Adjustment
The physical axis adjustment, or physical saturation, allows you to shrink the full axis data range
into a small physical stick movement.
S-Curves and J-Curves
There are two types of adjustable curves – S-Curves and J-Curves. J-Curves are linear axes,
like throttles and rotaries. S-Curves are non-linear, like X and Y axes.
English 16
The first screen
you'll see is the 'SELECT
DEVICE TO MODIFY'
screen.
You have two choices;
choose to alter either
the Stick or the Throttle
axis.