Toto ZL Manual De Instalación Y Del Propietario página 5

3. Connection of the
mixed supply hose.
(1) Turn the nut of the
connecting pipe and
connect the mixed supply
hose. (ill. 3)
4. Install drain assembly.
(1) Remove the plunger,
flange and gasket from
the drain assembly by
unfastening the flange and
pulling these parts from
the drain. (ill. 4)
INSTALLATION PROCEDURE
Handle Assembly
Never turn the nut on the
mixed supply hose side.
The hose may twist and
cause water to leak.
ill. 3
Connecting
Flow regulator
Up
Mixed supply hose
ill. 4
Drain
assembly
5
pipe
Nut
Gasket
(black)
Plunger
Flange
Deformed
gasket
Kick lever
box
Flanged nut