Maintenance; Cleaning; Calibration Interval; Specifications - Amprobe DM9C Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
2526044_Rev2_dm9c.qxd

Maintenance

Provided it is used in accordance with the users manual, the instrument needs no
special maintenance.

Cleaning

If the instrument is dirty after daily usage, it is advised to clean it by using a humid cloth
and a mild household detergent.
Prior to cleaning, ensure that instrument is switched off and disconnected from
external voltage supply and any other instruments connected (such as UUT,
control instruments, etc.). Never use acid detergents or dissolvants for cleaning.

Calibration Interval

We suggest a calibration interval of one year. If the instrument is used very often or if
it is used under rough conditions we recommend shorter intervals. If the instrument is
used only a few times a year, the calibration interval can be extended to 3 years.

Specifications

(at 23° C ± 5° C, max. 75 % rel. humidity)
Display:
3
Total display:
4000 digit
Polarity display:
automatic
Battery status display:
Battery symbol appears (< 2.5 V)
Auto-Power-Off:
approx. 15 min.
Overvoltage class:
CAT II / 600 V
Degree of contamination:
2
Power supply:
2 x 1.5 V, IEC R03 or LR03
Power consumption:
approx. 1.5 mA (typical)
Dimensions:
170 x 85 x 50 mm incl. holster
Weight:
approx. 410 g (incl. holster)
Ambient conditions:
Operation temperature:
0...50°C (0...80% rel. humidity)
Storage temperature:
-10...60°C (0...80% rel.humidity)(without battrie)
Height above sea level:
up to 2000 m
Overload protection:
Fuse (mA) :
Fuse (A) :
Temperature coefficient: 0.15 x specified accuracy per 1°C (<18°C and >28°C)
10/26/06
9:50 AM
3 /4
digits, LC-Display
FF500mA / 700V / 50kA , 6x32mm
F 10A/600V/50 kA, 6x32mm
10
Page 10

Publicidad

Tabla de contenido
loading

Tabla de contenido