A - Charging The Battery With An External Battery Charger; Machine Controls; A - Control Panel - Ghibli & Wirbel R 150 FD 85 Instrucciones De Uso

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
5.1.a - Charging the battery with an
external battery charger (Fig.
8)
- Move the machine near the battery
charging station.
- Remove the battery plug (26) from the
socket (5) of the machine's electrical sys-
tem.
- Connect the battery plug (26) to the ex-
ternal battery charger's outlet (37).
- Once the batteries have been charged,
reconnect the battery plug (26) to the
socket (5) of the machine's electrical sys-
tem.

6.1 - MACHINE CONTROLS

6.1.a - Control panel (Fig. 9)
29) Ignition key
- Turned in a clockwise direction to "ON" it
powers the circuits, enabling machine op-
eration.
- Turned in an anti-clockwise direction
to "OFF" it disconnects power to the
circuits and can be removed.
30) Maximum speed adjustment
potentiometer
It is possible to adjust the maximum
speed from "0" to "6" km/h with the po-
tentiometer (30).
- Turn the potentiometer (30) clockwise
to increase the speed, turn it anticlock-
wise to decrease the speed.
- When the accelerator pedal is pressed
the speed will be proportionate to the
set maximum speed.
31) Movement direction selector
- It prepares the working of the machine.
- By shifting the selector forward "
the machine moves forward; by shift-
ing the selector backward "
chine moves backward and the reverse
acoustic signal is activated. When the
selector is in the "0" central position the
machine remains in neutral.
38) Display
- See paragraph ("Display controls").
39) Button not in use
40)
- The suction activation is enabled by
turning the key (29) to the "ON" posi-
tion.
- Press the "
the suction, on the display the symbol
"
motion is engaged or if the machine is
in neutral, the squeegee drops.
- Press the (40) button again and the
"
gee lifts.
- If the machine is still, the squeegee is
lowered and the key (29) is on "ON"
after a certain period of inactivity the
squeegee will automatically lift.
42)
Pressing the button (42) "
duces the speed of the intake turbine,
which considerably reduces the ma-
chine noise; the symbol "
on the display with the function ena-
bled.
Pressing again button (42) "
turns off the function and the machine
will start to operate again in standard
mode; symbol "
display.
"
When turning off the aspiration turbine
with "silent operation" mode enabled,
" the ma-
the operation of the turbine will auto-
matically switch to "standard operation"
mode for the entire shut-off delay time.
EN - 7
Suction activation button
" button (40) to start
" will light up and, if the forward
" suction will stop and the squee-
Silent operation button
" appears on the
NOTE:
" re-
" appears
"