C - Brightness And Contrast Setting; Emergency; Safety Devices - Ghibli & Wirbel R 150 FD 85 Instrucciones De Uso

8.1.c - Brightness and contrast
setting
- Enter the parameter setting menu until
the following screen appears:
general
sets
display
bightness:
- Choose the type of display brightness by
setting a value from "0 to 30" using the
" " or " " buttons (51), then press
the " " button (48) to continue to the
contrast setting.
general
sets
display
33
tune:
- Choose the type of display contrast by
setting a value from "5 to 50" using the
" " or " " buttons (51), then press
the " " button (48) to confirm.
0
8.2 EMERGENCY (Fig. 8)
In case of emergency pull the plug (26) out
of the socket (5); to disconnect power to the
circuits and to stop all the functions of the
machine
WARNING:
Unplug (26) the machine while it is func-
tioning only if absolutely necessary; do
not follow this procedure to turn off the
machine as it may cause serious damage
to it.

8.3 - SAFETY DEVICES

WARNING:
The machine is equipped with an operator
presence sensor (41) this sensor blocks
all of the machine's functions and sets
the machine in neutral whenever no oper-
ator is present in the driver's seat.
EN - 12
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
(Fig. 11)