Grille Panel
Fully-Integrated Installation—Full Height Grille—Open
Soffit
⁵⁄₈
6
"
(16.83 cm)
Model
36
³⁄₈"
¹⁄₈"
Reveal
C
35¹⁄₄"
35³⁄₄"
(89.54 cm)
(90.81 cm)
Standard Integrated Grille Installation—Open or
Closed Soffit
1" (2.54 cm)
³⁄₄
5
"
(14.55 cm)
Model
36
Reveal ³⁄₈"
¹⁄₈"
D
35¹⁄₄"
35³⁄₄"
(89.54 cm)
(90.81 cm)
E
35¹⁄₄"
35³⁄₄"
(89.54 cm)
(90.81 cm)
IMPORTANT: The grille panel height, shown in the "Standard
Integrated Grille Installation" graphic, allows for an air gap critical
to refrigerator performance.
Full-Height Door Installation - No Grille - Open Soffit
No grille is used in a full-height door installation. Use an Armoire
kit to disguise the cooling system, located on the top of the
refrigerator, which is visible when the doors are opened. See the
instructions, provided with the Armoire kit, for installation details
and custom wood overlay door dimensions.
C
Top Grille Panel
42
³⁄₈"
¹⁄₈"
41¹⁄₄"
41³⁄₄"
(104.78 cm)
(106.05 cm)
D
Top Grille Filler
E
Top Grille Panel
42
³⁄₈"
¹⁄₈"
41¹⁄₄"
41³⁄₄"
(104.78 cm)
(106.05 cm)
41¹⁄₄"
41³⁄₄"
(104.78 cm)
(106.05 cm)
INSTALLATION
INSTRUCTIONS
Unpack the Refrigerator
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT:
Do not remove the film covering until the refrigerator is in its
operating location.
All four leveling legs must contact the floor to support and
stabilize the full weight of the refrigerator.
Keep the cardboard shipping piece or plywood under the
refrigerator until it is installed in the operating location.
1. Remove and save the literature package and hardware kit
located inside the refrigerator. Remove and save the literature,
grille, and trim taped to the outside of the refrigerator.
NOTE: Do not remove tape and door bracing until the
refrigerator is in its final location.
17