Care And Maintenance - Master Forge TG2036701-MF-01 Manual De Instrucciones

Turning Grill Off
After cooking, turn the grill off by rotating the regulator control knob to "OFF" position. The

control knob should pop up in the "OFF" position. If control knob does not pop up,
disconnect gas cylinder to turn grill off and replace the gas regulator.

This appliance will be hot during and after use. Use insulated oven mitts or gloves for
protection from hot surfaces or splatter from cooking liquids.

Allow grill to cool completely before storing.

CARE AND MAINTENANCE

CAUTION:
1. All cleaning and maintenance should be done when grill is cool and with the gas regulator
disconnected.
2. Do not clean any grill part in a self-cleaning oven. The extreme heat will damage the finish
and other components.
3. Clean the grill after each use. When grease or dirt accumulates inside a hot grill body, this
could cause a grease fire.
Notices
1. Abrasive cleaners will damage this product.
2. Never use oven cleaner to clean any part of grill.
3. This grill should be thoroughly cleaned and inspected on a regular basis.
Cleaning Surface
1. Wipe surface clean with mild dishwashing detergent or baking soda.
2. For stubborn residue use a citrus-based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
Cleaning Burner
1. Turn gas off at the control knob and
remove LP gas cylinder.
2. Remove regulator.
3. Remove cooking grid and flame tamer.
Unscrew the burner bracket to remove
burner.
4. Clean inlet of burner with small bottle brush
or compressed air.
5. Remove all food residue and dirt on burner
surface.
6. Clean any clogged ports with a stiff wire
(such as a straightened paper clip).
7. Inspect burner for any damage (cracks or
holes). If damage is found, replace with
new burner.
8. Reinstall burner. Reconnect burner, flame
tamer and cooking grid.
14 Lowes.com/masterforge
Cooking Grate
Flame Tamer
Burner
Unscrew
the burner
bracket