:
Place the unit on the ground.
:
Make sure you have a firm footing:
Hold the unit firmly on the ground
with your left hand on the handle
and press down.
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way - it might break.
BG 45
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that it can rewind properly.
5
If the engine is cold:
(choke position g
g )
g
g
:
Pull the starter rope five times.
:
Move the choke lever (5) to e
:
Continue cranking until engine runs.
english / USA
Note: If the engine does not start
after 10 pulls with the choke lever
set to e :
Set choke to g
g
g
g , pull the starter
rope five times, set choke to e and
continue cranking.
If engine is warm:
:
Continue cranking until engine runs
(choke lever to e )
As soon as engine runs
:
Blip the throttle trigger so that
interlock button pops out and the
engine settles down to idle speed.
If the engine stops during warm-up or
acceleration:
:
Repeat starting procedure as
described under "If engine is cold"
Your unit is now ready for operation.
13