Remington iLight IPL 3500 Guía De Uso Y Cuidado página 47

Test a patch of skin
To choose the right energy level, test each treatment area separately
(refer to the skin color chart at the front of this manual).
1.
2.
3.
4.
y
y
IPL3500_18817_V2.indd 47
Press the control button to turn on the device. The level 1 energy
level indicator light will go on.
Place the treatment window on your skin to deliver one pulse.
If you did not experience abnormal discomfort after 24 hours,
increase the energy level on your next test spot. To increase the
energy level, remove the device from your skin and press the
control button again. This will increase the energy level.
Deliver one pulse on a different spot at energy level 2. Use the
energy levels indicated on the skin color chart. Wait 24 hours. If
there are no adverse effects, use a different test spot and continue
testing at increased energy levels to find the highest level that is
comfortable for you, without adverse effects.
When you find the highest energy level that is most comfortable
for that treatment area, you can start your treatment.
NOTES:
The device will only emit repeated pulses when it is in firm
contact with your skin, and you keep moving it across your skin.
Use a lower energy level if you experience any discomfort. Be sure
to do a spot test for each part of the body you wish to treat.
47
10/30/17 3:36 PM