Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Settings
Parameter description
Hibernation Delay
Set the time the tool will
remain at Sleep temperature
before entering the
Hibernation mode. At this
time, the power supply is cut
off and the tip remains at room
temperature.
Temp Adjustment
It provides a more precise
adjustment between the
selected temperature and the
actual one.
14
Recommendations
This function completely
protects the tip from oxidation
during long periods of
inactivity while the tool is in the
stand.
Retinning the tip before
placing the tool in the stand
also helps prevent oxidation
and extends the life of the tip.
Set values within ±50°C
(± 90°F) to achieve zero error.
JBC strongly recommends
the use of TID-A or TIA-A
Thermometers to obtain
precise readings.
Warnings
Increasing the default
value will accelerate
oxidation and shorten the
tip life.
When the user
changes the cartridge
type, the parameter should
be reset to 0°C/F or to
the value needed for this
cartridge.
E.g. If a correction of
+20°C (+36°F) is set for the
C245966 (thick type) and
then the user changes the
cartridge for a C245030
(which is thinner) without
resetting, they would be
working at a temperature
of +20°C (+36°F) lower for
the C245030 which does
not need any temperature
adjustment.
Publicidad
Tabla de contenido
