Signs And Symbols Used; Scope Of Delivery - Abicor Binzel MIG ROBO Serie Instructivo De Servicio

MIG/MAG ROBO welding torch
MAG
Voltage rating
TCP
Tab. 6
Unit of measurement in drawings or diagrams Millimetres [mm]
Tab. 7
3.3 Nameplate
The MIG/MAG ROBO welding torch system is identified by a sticker on the machine-side
connection housing.
 1 Identification on page EN-3
When making enquiries, please note the following information:
• Sticker data

3.4 Signs and symbols used

In the operating instructions, the following signs and symbols are used:
Symbol Description
•

1

4 Scope of delivery

The welding torches in this series come as entire units ready for welding, i.e. with the cable
assembly and central connector. Check whether you have selected the correct equipment parts
for initial assembly.
• Torch
• Cable support on machine side with
central connector
Tab. 8
The ROBO cable assembly does not make the Welding torch system WH/WHPP fully
functional. Additional welding-task-dependent components are also required for the initial
assembly. These include the following:
BAL.0046 • 2019-02-07
Metal active gas
Classification of the insulation resistance, voltage strength and
protection type
Tool Centre Point
Abbreviations and term definitions
Dimensions
List of symbols for action commands and enumerations
Cross reference symbol refers to detailed, supplementary or further information
Action(s) described in the text to be carried out in succession
Scope of delivery
4 Scope of delivery
• Cable assembly
• Operating instructions
EN - 7