Canopy
Fully extend the handle for canopy use.
1
- To open the canopy, pull the canopy toward the front of
the seat. To close the canopy, push it back. (12)
2
- Position the canopy visor forward or backward as
needed. When not in use, fold the canopy visor under
the canopy. (13)
3
- Open the zipper (14) on the canopy to use the dream
drape
.
™
4
- Pull down on the dream drape
5
- To detach the canopy, pull in on the canopy mounts to
remove them. (16)
6
- Unsnap the canopy from the back of the seat and
remove the canopy. (17)
To reattach the canopy, reverse these steps.
PEPP next instructions
13
for extra shade. (15)
™
Calf Support
The calf support has 2 use positions.
1
- To raise the calf support, lift up. (18)
2
- To lower the calf support, press the adjustment buttons
on both sides (19)-1, and push down (19)-2.
Recline
There are 2 zippers on each side of the seat back for
2 recline positions.
1
- For recline position 1, unzip the outer zippers. (20)
2
- For recline position 2, unzip the inner zippers. (21)
Seat Pad
The seat pad can be removed to provide a mesh seating area
for better ventilation during hot weather.
Remove the canopy before removing the seat pad.
1
- To remove the seat pad, unsnap the seat pad from the
back of the seat. (22)
2
- Then, unbuckle the harness, thread the harness through
the harness slots and remove the seat pad. (23)
DO NOT remove the backrest tube.
PEPP next instructions
14