Activating Standby Mode; Accessing The Settings Menu - Grant Optima TX150 Manual Del Operador

5.2.14 Activating standby mode

In standby mode the TX150/TXF200 is still powered, however key functions (heating,
pump, countdown timer and programs) are switched off. In standby mode access is
limited to the settings menu, enabling the functions such as alarms and programs to be
configured while the unit is not operating.
Note. When entering standby mode the pump will remain on for 5 minutes to allow
internal cooling to continue.
If a countdown timer has been set or a program is running before activating standby
mode they will be terminated.
 
.
°c
 
 
:
.
 
.
°c
 
 
:
.

5.2.15 Accessing the settings menu

The settings menu provides access to the following settings screens:
preset selection and definition, program selection and definition, liquid type, probe
(internal or external), alarms, buzzer level, relay state, language and display rounding.
Section 5.3 provides detailed information on viewing, editing and saving settings.
 
.
°c
 
 
:
.
30424 V6
Page 19
1. Rotate the dial until the standby icon is
highlighted, press the S button.
The temperature and countdown timer
°c
values are no longer displayed.

2. To resume operation, rotate the dial until the
standby icon is highlighted, press the S button.
°c
The display returns to the home screen and the
TX150/TXF200 resumes operation at the last
temperature and pump speed set.

1. Rotate the dial until the settings icon is
highlighted, press the S button.
°c
The settings menu is displayed, with presets
highlighted at the top of the list.
Shortcut to settings menu. Pressing F whilst in
the home screen when the cursor is white will

automatically display the settings menu
www.grantinstruments.com
TX150 & TXF200
Operating Manual