Creating A Program (Txf200 Only) - Grant Optima TX150 Manual Del Operador

Preset
Temperature
Pump Speed

5.3.2 Creating a program (TXF200 only)

 
.
°c
 
 
:
.
Settings
Presets
Programs
Liquid
Probe
Segment 01
Target temperature
Pump speed
Duration (hh:mm)
Action
Relay Off
TX150 & TXF200
Operating Manual
5. Rotate the dial to highlight pump speed, press S
°c
 
to select. Rotate the dial to display pump speed (1
.
to 5), TXF200 only. Press S to set.
 
.
Pressing F restores the original preset pump
speed with pump speed highlighted.
To save the temperature and pump speed
configuration, rotate the dial to highlight save and
Save
press S.
The display returns to the settings menu screen.
Repeat procedure to configure presets 2 and 3
6. Press F to return to the home screen.
1. Rotate the dial until the settings icon is
highlighted, press the S button.
°c
Pressing F returns to the home screen without
making changes.

2. Rotate the dial to scroll up and down the list, until
°c
 
programs is highlighted, press S to select.
.
The program icon is displayed
3. Rotate the dial to select the program to be
created. Press S to select.
Segment 1 screen is displayed.
4. Target temperature is highlighted, press S to
°c
 
select.
.
 
5. Rotate the dial to define the target temperature.
.
Press S to set.
 
:
Save
www.grantinstruments.com
EN
30424 V6
Page 22