Testing For Gas Leaks; Modules; Burner And Grill Module; Griddle - Amana AKGD3060 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A—To regulator
B—Adaptor
C—Flexible connector
D—Manual shutoff
E—¾-inch service pipe stub

Testing for Gas Leaks

WARNING
To avoid property damage or serious personal injury,
never use a lighted match to test for gas leaks.
After final gas connection is made, test all connections
in gas supply piping and cooktop for gas leaks.
1. Place soap suds on connection.
• Bubbles appear if leak is present.
2. Tighten joint if leak is at factory fitting.
• If leak is not at factory fitting, unscrew, apply
more joint compound, and tighten to correct leak.
3. Retest connection for leak after tightening.
• Retest any connections that were disturbed.

Modules

This cooktop features a choice of different modules,
shown below. Call your local authorized dealer or
Amana at 1-800-843-0304 inside U.S.A. or 319-622-
5511 outside U.S.A. to purchase accessories.

Burner and Grill Module

Burner module and Smoke Control Grill™ come from
factory with cooktop. Burner module installs on both
sides. Grill installs on right side only.

Griddle

Griddle installs on right side only.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido