Parts List - Craftsman Laser Trac Manual Del Operador

Z_ WARNING:
Yoursaw should NEVER be connected to the power soume
when you are assembling pads, maldng adjustments,Installing or removing
blades, cleaning or when It is not In use. Disconnectingthe saw will prevent
accidental starting, which could cause serious personal Injury.
I. Remove the Saw from the case and JnspectIt carefully to make sure that no breakage
or damage has occurred during shlpplngo
2. There Is a blade storage area in the case where a General Purpose Blade is located
with "PwoHex Wrenches used for installing or changing blades, Inspect the blade
carefully to make sure that no breakage, cracking or other damage has occurred,
3oThe Edge Guide is force-fitted into the top of the lid of the Storage/Carrying Case,
4,The Non-Scratch Base Cover Is force_fittedInto the top lid of the case_
5oThsVac Hose Adapter is force-fitted Intothebottom of the case.
6. If any of the parts are damaged or missfng (refer to PARTS LIST below), return
the saw to your nearest Sears store or Craftsmanoutlet to have the saw replacedo
L_ WARNING:
If any parts are mlsslng, DO NOT operate this saw unt, the
missing parts are replaced. Failure to do so could result In possible serious
personal Injury.
PARTS LIST
(Fig. 1)
1.Saw
J
7. Impact ResistantCase
8, Operator'sManual "-'-_r
13
5.Vae Hose Adapter
(stored incase)
6. Non-Scratch
Base Cover
(stored in case)