EGO LM2000 Manual De Operación página 19

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

sTarTING/sTOppING THe MOwer (Fig. 14, 15 & 16)
CAUTION: Do not attempt to override the operation of the
safety key and bail switch.
WARNING: the operation of any lawn mower can result in
foreign objects being thrown into the eyes, which can damage
your eyes severely. always wear safety glasses while operating
the mower, or while performing any adjustments or repairs on it.
WARNING: Do not use the mower in the rain.
WARNING: ensure that other people and pets remain at least
100' (30m) away from the mower when it is in use.
WARNING: the blade will continue to rotate for a few
seconds after the mower is switched off. allow the motor/blade to
stop rotating before switching "on" again. Do not rapidly switch
off and on.
NOTE: the motor cannot be started unless:
a) the side rails are fully extended
b) Both green handle-locking clamps are securely closed
c) the handle is locked into one of the operating positions
 attach the battery pack to the mower and close the battery
cover.
NOTICE: make sure that the latch on the mower snaps into place
and that the battery pack is secured to the mower before starting
operation.
 insert the safety key into the slot and then depress the
safety key (Fig. 14 &15).
 With the safety key depressed, pull the bail switch upward
to the handle and release the safety key to start the mower
(Fig. 15).
 to stop the mower, release the bail switch (Fig. 16).
Once the bail switch is released, it will activate the "automatic
Braking mechanism. " the motor has an electric brake; the mower
blade will stop rotating in 3 seconds.
14
1
2
FULLY EXTEND
SIDE RAILS AND
LOCK CLAMPS
15
16
Bail Switch
(released position)
56-VOlt litHium-iOn COrDleSS laWn mOWer — lm2000
3
PULL HANDLE
INSERT SAFETY KEY
TOWARD YOU
PRESS AND HOLD
TO START MOTOR
Bail switch
Safety key
Safety Key
(released position)
19

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Power+ lm2000

Tabla de contenido