Movement LX 150 G4 Manual De Instrucciones página 72

SAFETY INFORMATION
DANGER!
•Do not place your hand on the motor of the equipment, risk of serious or
fatal accident to the user. If the treadmill is faulty, contact an authorized
dealer immediately, do not attempt to repair the equipment yourself.
•Do not make modifications on the motor of the equipment, risk of serious or
fatal injury and loss of product warranty.
•Do not run backwards on the electronic module, risk of serious or fatal
accidents.
•Only use accessories as recommended by the manufacturer.
•Keep the power supply cord away from hot surfaces and heat sources.
Also, make sure that the power cord is not screwed onto any part of the
treadmill. If the cable is screwed under the belt, lift the cable and unscrew
the cable.
•NEVER pull or move the equipment through the power cord. Before making
any changes to the location of your equipment, always unplug the power
cord from the wall outlet.
•Before removing your equipment from the power, be sure to set the power
switch to OFF or '' O ''.
•At the slightest signs of wear on the power cord, or exposure of the wires,
immediately stop using the equipment and contact an authorized service
point to exchange the part.
•It is MANDATORY to use a suitable and properly grounded outlet in order to
prevent electric shock, burns, fire, equipment damage, module damage and
severe or fatal injuries to the user.
•When cleaning the equipment, remove the equipment from the power
outlet to prevent electric shock. Do not soak the electronic module there is
risk of shock.
•When you finish using the machine, always remove the machine from the
power outlet.
10
/
/