Tabla de contenido
Publicidad
BlueAnt
Advanced Headset Functions
Pairing your headset with multiple Bluetooth devices
The Z9i will connect to 2 phones at a time but 5 devices can be paired to it.
1. Make sure the last phone used has Bluetooth switched off or is out of range.
2. Follow the procedure in 'Pairing Procedure' above for each device you want to pair.
Multi-point
With Multi-point you can connect two phones to the Z9i and answer which ever phone rings.
1. Connect: The Z9i will connect to the last two phones connected upon powering ON. If you wish to connect a different
previously paired phone, do so from that phones Bluetooth menu. After this the Z9i will always connect to that phone.
2. Answer: On an incoming call from either phone, just click the MFB
to answer the call.
3. Answer a second call: Place phone 1 on hold and receive phone 2 by press and holding Vol
for 3 seconds.
4. End the second call: To end phone 2, return to phone 1 on hold, click the MFB
.
5. Answer phone 2, hang up phone 1: To End phone 1 and answer phone 2 Press and Hold Vol
for 3 seconds.
Note: Redial will dial the fi rst connected phone only.
Firmware upgrade
The BlueAnt Z9i is fi rmware upgradeable via the USB port and provided USB cable.
Please see the support section at www.blueantwireless.com for information and downloads for available upgrades.
14
Publicidad
Tabla de contenido
