Set The Timer; Operate The Timer - Timex Ironman Race Trainer M175 Manual Del Usuario

Set the Timer

1. Press MODE until TIMER appears.
2. Press STOP/RESET/SET until TIMER SET then SET briefly appear on the
display followed by the timer with the hours value flashing.
3. Press START/SPLIT (+) to increase or toggle the values or HEART RATE
(-) to decrease or toggle the value. This applies for hours, minutes,
seconds, end action, and halfway alert.
NOTE: The end action setting allows you to choose how the timer
operates at the completion of a timing countdown. Options include
STOP, REPEAT, or CHRONO. If you choose CHRONO, the watch
automatically switches to Chrono Mode at the end of the countdown
(if the chronograph is off and reset to zero) and begins operating the
chronograph.
NOTE: To quickly change the value being set, press and hold
START/SPLIT (+) or HEART Rate (-).
4. Press MODE (NEXT) to move to the next value for hours, minutes,
seconds, end action, and halfway alert.
5. Press STOP/RESET/SET (DONE) to save your changes and exit the
setting process.

Operate the Timer

1. Press and hold STOP/RESET/SET to clear data from any previous use
32
of the timer (if necessary). You cannot start another countdown without
resetting the timer.
2. Press START/SPLIT to start the timer countdown. The hourglass icon
will appear on the display.
3. Pause the countdown by pressing STOP/RESET/SET.
4. Resume the countdown by pressing START/SPLIT again or reset the
timer by pressing and holding STOP/RESET/SET again until the words
HOLD TO RESET briefly appear on the display followed by the original
countdown time.
5. When the timer reaches the halfway point (if HALFWAY ALERT is set) a
brief chime will sound.
6. When the timer reaches zero, an alert will sound. Press any button to
silence the alert.
7. The timer will stop after the alert if set to STOP; or
The timer will begin another countdown if set to REPEAT and continue
until you press STOP/RESET/SET. The display will show REP and a
number (for example, REP 2). REP indicates the timer is repeating and
the number indicates how many times the timer has cycled through
the repeat countdown. You will also see the repeating hourglass
I
icon , indicating the timer is set to repeat.; or
The timer will switch to Chrono Mode if the chronograph is off and
cleared. You will see the stopwatch icon
W
indicating the timer will
33