Test And Configure - Tripp-Lite PDUMH15AT Manual Del Propietário

2. Installation

2.4 Test and Configure

Test Network Connection: After an IP address has been assigned, try to access it with a Web
browser that supports frames, forms and Java™. Open a Web browser on a computer connected to
the LAN and enter the device's IP address. You should be prompted for a password. The user name
is localadmin and the default password is localadmin. After you enter the user name and
password, the PowerAlert Status page will appear in the browser window. For more information
about configuration and operation of the managed device, refer to the SNMPWEBCARD User's
Guide (available for download at www.tripplite.com).
Note for Network Management System Users Only: Tripp Lite MIB files must be loaded on each Network
Management Station that will monitor the UPS system via SNMP . The files are available at www.tripplite.com.
10
16-05-185-9335E0.indb 10 7/28/2016 3:04:44 PM