Tripp-Lite PDUMH15AT Manual Del Propietário página 13

3. Features
ENVIROSENSE Port: Use this port to connect a Tripp Lite ENVIROSENSE environmental
E
sensor to provide remote temperature/humidity monitoring and a dry contact interface to
control and monitor alarm, security and telecom devices. Visit www.tripplite.com for more
information on this product.
Note: Do not connect a keyboard or mouse to this port.
Models PDUMH15AT, PDUMH15HVAT, PDUMH20AT and PDUMH20HVAT contain a built-in slot
that supports the optional SNMPWEBCARD accessory (sold separately).
Reset Button: To reset the network interface, use a small paperclip or pointed tool to press
F
the reset button located above the RJ45 network port.
Input Source Indicator: When the PDU is connected to a live AC power source, the Primary or
8
Secondary input LED illuminates to indicate which source is supplying power to the outlets.
16-05-185-9335E0.indb 13
Primary and Secondary AC Input Power Cord
(Models PDUMH20HVAT, PDUMH20HVATNET): Two C19-C20
cables are included: one for Primary Input, and one for Secondary
Input.
Primary AC Input Power Cord
(Models PDUMH15HVAT, PDUMH15HVATNET): A C13-C14 cable
is included.
Secondary AC Input Power Cord
(Models PDUMH15AT, PDUMH15ATNET): The detachable cord
has an IEC-320-C13 connector and a NEMA 5-15P plug.
Secondary AC Input Power Cord
(Models PDUMH20AT, PDUMH20ATNET): The detachable cord
has an IEC-320-C19 connector and a NEMA L5-20P plug.
Input Plug Adapters
(Models PDUMH20AT, PDUMH20ATNET): The adapters convert
NEMA L5-20P input plugs to NEMA 5-20P input plugs.
Plug Lock Inserts
(Models PDUMH15HVAT, PDUMH15HVATNET): Prevent
accidental disconnection of C13-C14 or C19-C20 power cords.
Cable Retention Tray
(Models PDUMH20HVAT, PDUMH20HVATNET): Tie the Primary
and Secondary Input cords to the Cable Retention Tray. Once
you've secured the two cords together and ensured that the
Secondary cord has a comfortable amount of slack, insert the
Secondary cord outlet into the IEC power inlet.
13
7/28/2016 3:04:45 PM