Tripp-Lite PDUMH15AT Manual Del Propietário página 41

2. Installation
Gateway address [192.168.1.1]? Enter the Gateway address
Enable DHCPv6 for the Ethernet interface [Y]?
Enable static IPv6 for the Ethernet interface [N]?
DNS server [8.8.8.8]?
This card's host name [poweralert-0610337151181]?
This card's domain []?
From this point forward, press <Return> for each option to accept the default
configuration:
Enable SNTP [Y]?
Enable FTP [Y]?
Port number [21]?
Enable HTTP [Y]?
Port number [80]?
Enable HTTPS [Y]?
Port number [443]?
Enable Telnet Menu [Y]?
Port number [23]?
Enable Telnet Programs [Y]?
Port number [5214]?
Enable SSH Menu [Y]?
Enable SCP [N]?
Port number [22]?
Enable SSH Programs [Y]?
Port number [2112]?
Enable SNMP [Y]?
Port number [161]?
Enable SNMPv1 [Y]?
Enable SNMPv2c [Y]?
Enable SNMPv3 [Y]?
Do you wish to modify the network watchdog configuration? [N]?
HARDWARE PARAMETERS:
Would you like to update the RTC date/time in GMT [N]?
Time Zone in 30 minute intervals, +/-HH:MM[-06:00] (+ is optional):
Do you wish to configure the advanced settings [y/n]
SECURITY SETTINGS:
Would you like to update the Root Password [N]?
Do you wish to modify the users [N]?
Do you wish to modify the auth and accounting method? [N]?
Do you wish to modify the radius hosts table? [N]?
Erase the server private key passphrase?
Erase the client private key passphrase?
New passphrase for server private key?
Re-enter passphrase for server private key?
New passphrase for client private key?
Re-enter passphrase for client private key?
MISCELLANEOUS SETTINGS:
How long (in seconds) should CPU delay before starting up [5]?
Saving the changes in NV memory...Done.
Lorsque « Done » (terminé) s'affiche, la carte va redémarrer et l'adresse IP statique
deviendra active. Une fois que les nouveaux paramètres IP statiques sont affichés, passer à
2.4 Essai et configuration.
41
16-05-185-9335E0.indb 41 7/28/2016 3:04:59 PM