Annual Maintenance; Burner Flame Pattern; Burner Tube Ports - Weber GO-ANYWHERE Guia Del Propietario

KEEPING YOUR
WEBER GAS GRILL IN
®
TIP-TOP SHAPE
m DANGER
Failure to correct any problems described
on this page may result in a fire, which can
cause serious bodily injury or death, and
cause damage to property.
14
WWW.WEBER.COM
®

ANNUAL MAINTENANCE

To keep your Weber gas grill performing as safely and
®
efficiently as on day one, we strongly recommend that you
inspect and clean the burner tube at least once a year.
Below is important information about this area of the grill
that should undergo annual maintenance.
If you observe an incorrect flame pattern or blocked
burner port, proceed to the "BURNER TUBE CLEANING
OR REPLACEMENT" instructions on the following pages.

BURNER FLAME PATTERN

The burner tube in your Weber gas grill was factory set
®
for the correct air and gas mixture. The correct flame
pattern is shown in illustration and described below:
• Burner tube (1)
• Tips occasionally flicker yellow (2)
Light blue (3)
•
• Dark blue (4)
Check burner flame pattern. If the flames do not
match the above description, it could be an indication
that the air shutter opening has become blocked with
debris (5). (Refer to "BURNER TUBE CLEANING OR
REPLACEMENT".)

BURNER TUBE PORTS

Over time, from repeated use of the grill, the burner
tube ports will become dirty. Blocked and dirty ports can
restrict full gas flow. Following are ways to determine
whether burner tube ports are dirty or blocked.
• Grill does not reach desired temperature
• Grill heats unevenly
• Burner does not ignite
1
5
2
3
4