Publicidad
REY001A
PART NUMBER
DESCRIPTION
F31005-150
NYLOCK LOCKNUT 1/2 UNF GR 5 Z
F11106-150
HCS 1/2 x 2-1/2 UNF GR 5 Z
A00260-65D60
Hollow Rubber Spring
K51282-003
REY001A FRAME BRACKET
K11004-005
REY001 WELD'T (PAINTED)
K11005-005
REY001 WELDMENT (PAINTED)
B90203
16 x 9.5 x 7 CARTON
B10100
NEWSPRINT 18" ROLL
B00029-011
BARCODE LABEL FOR KIT
1 of 2 & 2 of 2 LABELS
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email sales@timbren.com
QTY
LOCATION
4
G1D
4
G1D
2
C17C
2
D5B
2
D5A
4
D5A
2
A3A
1
2
1 ea.
Issued:
5/20/2010
TIMBREN INDUSTRIES INC.
www.timbren.com
ASSEMBLY NOTES:
ALL COMPONENTS ARE DIVIDED IN
HALF AND PACKAGED INTO TWO
IDENTICAL PACKAGES.
APPLY "1 of 2" and "2 of 2"
LABELS TO CARTONS
Publicidad
