Midea MLH52S7AGS Manual De Usuario E Instrucciones De Instalación página 29

Problem Possible Cause
Leaking water Fill hoses or drain hose is
(cont.) improperly connected
Household drain may be
clogged
Dispenser clogged
Incorrect use of detergent • Use HE and correct
Dispenser box crack
Clothes too Load is out of balance
wet
Pump clogged
Overloading
Drain hose is kinked or
improperly connected
What To Do
• Make sure hose
connections are tight at
washer and faucets and
make sure end of drain
hose is correctly inserted
in and secured to drain
facility.
• Check household
plumbing. You may need
to call a plumber.
• Powder soap may
cause clogs inside the
dispenser and cause
water to leak out the
front of the dispenser.
Remove drawer and
clean both drawer and
inside of dispenser box.
Please refer to Cleaning
the Washer section.
amount of detergent.
• If new installation, check
for crack on inside of
dispenser box.
• Redistributes clothes and
run drain & spin or rinse
& spin.
• Increase load size if
washing small load
containing heavy and
light items.
• The machine will slow
the spin speed down to
400 rpm if it has a hard
time balancing the load.
This speed is normal.
• See page 25 on how to
clean the Pump Filter.
• The dry weight of the
load should be less than
22 lbs.
• Straighten drain hose and
make sure washer is not
sitting on it.
29