Seca 878 Manual De Instrucciones página 17

2 in 1 function
The 2 in 1 function enables the body weight of babies and small children to be deter-
mined. The child is held in the arms of an adult. Proceed as follows.
– Press the start key briefly with no load
on the scales.
– Wait until the display
– Stand on the scale without the child.
You can read off the weighing result on
the digital display.
– Now hold down the 2 in 1 key to activate
the adult-and-child function.
The scale stores the weight of the adult
and the display returns to zero.
the display NET appear in the display.
– Now take the child onto the scale. You
can leave the scale to do this, in which
-----
case appears in the display.
The scale determines the weight of the
child. Once the value is stable for about
3 seconds, the display is retained. This
avoids the display jumping about as a
result of the child's movements.
HOLD and NET appear in the
display.
If several children are to be weighed
consecutively, it is important that it is
always the same adult who performs
the measurement and that this per-
son's weight does not change (e.g.
due to a piece of clothing being
removed).
The 2 in 1 function remains switched on until
– you press the 2 in 1 key again (total weight is displayed).
– the scale switches off automatically.
Model 878
0. 0 0
appears.
0. 0 0
and
0. 0 0
kg
2 in 1 key
6. 5 0
kg
HOLD NET
17
GB