ESAB LHI 425 Manual Do Usuário E Pecas De Reposicao página 24

P.S.: The parameter welding values depends, basically, on the material and
the diameter of electrode used, the thickness to be weld and the welding
position.
3) Open the arc, and if needed re-adjust the current.
8) MAINTENANCE
8.1) Recomendations
The LHI Rectifier requires little maintenance in normal environment and opperation conditions. It is
sufficient to blow it dry clean using dry compressed air free from oil
After cleaning the equipment with blow dry air, check that the electric connections and components are
properly fixed.
Check for possible faults in the wire isolations or electric cables, including the welding cable and any others
and if any of them is faulty substitute it.
8.2) Repair
In order to ensure the perfect functioning and performance of a ESAB equipment, use only original parts
supplied by ESAB PLC or approved by them.
All guarantee undertakings from the supplier cease to apply if the customer uses non-original or non -
approved parts when replacing any of them.
Spare parts can be obtained from the ESAB Authorized Services or from its Sales Distributors listed on the
last page of this Manual. Always inform the Equipment Model and Serial Number.
9) ACCESSORIES
TABLE 9.1
Description
Remote control
Remote control cable 05 meters
Remote control cable 10 meters
Remote control cable 15 meters
Remote control cable 20 meters
Remote control cable 30 meters
Cable electrode holder and work clamp (6m)
Kit VOLT/AMP
24
LHI 425
once a month
Reference
0401455
0400530
0400531
0400532
0400535
0400581
0400257
0401453
.
REMOTE CONTROL