Symbol; Safety Information - Amprobe LT-10 Manual De Uso

SYMBOLS

Caution! Risk of electric shock.
W
Caution! Refer to the explanation in this manual.
The equipment is protected by double insulation or reinforced
T
insulation.
N
Battery.
)
Canadian Standards Association (NRTL/C)
P
Complies with European Directives.
;
Conforms to relevant Australian standards.
Do not dispose this product as unsorted municipal waste.
=
Contact aqualified recycler.

SAFETY INFORMATION

The meter complies with:
IEC/EN 61010-1 3rd Ed., UL61010-1 2nd Ed. and CAN/CSA C22.2 No. 61010-1-
04 + CSA Update No.1: 2008 to CAT II 300 V, CAT I 600 V, pollution degree 2.
EMC IEC/EN 61326-1
"This product has been tested to the requirements of CAN/CSA-C22.2
No.61010-1, second edition, including Amendment 1, or a later version of
the same standard incorporating the same level of testing requirements."
Measurement Category II (CAT II) is for measurements
performed on circuits directly connected to low voltage; for example,
measurements on household appliances, portable tools and similar
equipment.
Measurement Category I (CAT I) is for measurements performed on circuits
not directly connected to mains.
CENELEC Directives
The instruments conform to CENELEC low voltage directive 2006/95/EC and
electromagnetic compatibility directive 2004/108/EC
For Use by Competent Persons
Anyone using this instrument should be knowledgeable and trained about
the risks involved with light fixtures and electrical connections. They
must understand the importance of taking safety precautions and testing
the instrument before and after use to ensure that it is in good working
condition.
3