Unpacking And Inspection; Feature - Amprobe LT-10 Manual De Uso

W Warning: Read Before Using
To avoid possible electric shock or personal injury:
• If the tester is used in a manner not specified by the manufacturer,
protection provided by the tester may be impaired.
• For indoor use only. Do not use the tester in rain, snow, damp or wet
locations. Do not use the tester around explosive gas or vapor. Do not
insert or remove the battery in an explosive or flammable environment.
• Comply with local and national safety requirements.
• Use proper protective equipment as required by local or national
authorities.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 LT-10 Lamp Tester
1 Detachable antenna
1 Adaptor plate
1 Carrying case
1 9V alkaline battery
1 Users manual
If any of these items are damaged or missing, return the complete package
to the place of purchase for an exchange.
FEATURES
The Amprobe LT-10 Lamp Tester is a pocket-size tool designed to
troubleshoot florescent lamps and verify presence of voltage in electrical
systems.
Three easy steps to troubleshoot lamps:
1. Check if fluorescent (electroluminescent) light bulb is damaged with
Lamp-test and pin-check functions
2. Verify if voltage is present at the ballast with VolTect
voltage detection.
3. If light bulb passes the test in step 1 and the voltage is present in step 2,
but the lamp is not working, then replace the ballast
4
non-contact
™