Cybex Platinum SOLUTION Z-FIX Manual Del Propietário página 20

INSTALLING USING LATCH/UAS
STEP 3
Place the Solution Z–fix on its side. While squeezing the
orange LATCH/UAS Adjustment Handle located on the
bottom of the Booster Base, pull the LATCH/UAS Connectors
out until they stop. Then rotate the LATCH/UAS Connectors
180°.
STEP 4
Push the LATCH/UAS Connectors onto the lower anchors
until you hear them CLICK. The
be visible on the release button when the LATCH/UAS
Connectors are securely attached to the lower anchors.
STEP 5
While squeezing the LATCH/UAS Adjustment Handle, push
the booster until it rests flat against the vehicle seat back.
Release the handle and the booster seat will lock into place.
STEP 6
Make sure that the booster seat is connected safely by trying
to pull it out on both sides.
18
GREEN
security bar will
3
6
4
5