Pair Devices; Receive Data Using Bluetooth Connectivity; Block Devices - Nokia N78 Manual Del Usuario

Pair devices

To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity,
scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other device
to use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as
well.
3. Some audio enhancements connect automatically
to your device after pairing. Otherwise, scroll to the
enhancement, and select
audio device.
Paired devices are indicated by
To set a device as authorised or unauthorised, scroll to
the device, and select from the following options:
Set as authorised
●
device and the authorised device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
100
devices, such as your compatible headset or PC or
Options New
>
Options Connect to
>
in the device search.
— Connections between your
devices that belong to someone you trust.
indicates authorised devices in the paired devices
view.
Set as unauthorised
●
this device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select
Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if you
want to accept the message. If you accept,
displayed, and the item is placed in the Inbox folder in
Messaging. Messages received through Bluetooth
connectivity are indicated by
Tip: If your device notifies you that the memory
is full when you try to receive data through
Bluetooth connectivity, change memory card as
the memory where the data is stored.

Block devices

Press , and select Tools
To block a device from establishing a Bluetooth
connection to your device, scroll right to open
— Connection requests from
Options
is
.
> Bluetooth.
Paired
>