Enhancement Settings; Security Settings; Phone And Sim - Nokia N78 Manual Del Usuario

screen. The content from different applications is
hidden. To display the content, select a shortcut and
press the scroll key left. Select
active toolbar.
Operator logo — This setting is only available if
●
you have received and saved an operator logo.
Select Off if you do not want the logo to be shown.
Language
Changing the settings for the phone language or
writing language affects every application in your
device until you change these settings again.
Phone language — Change the language of the
●
display text in your device. This also affects the
format used for date and time and the separators
used, for example, in calculations.
selects the language according to the information
on your SIM card. After you change the language, the
device restarts.
Writing language — Change the writing language.
●
This affects the characters available when writing
text and the predictive text dictionary used.
Predictive text — Set predictive text input on or
●
off for all editors in the device. The predictive text
dictionary is not available for all languages.

Enhancement settings

Press , and select Tools
Enhancement.
Basic to switch off
Automatic
Settings General
> >
Some enhancement connectors indicate which type of
enhancement is connected to the device.
indicators", p. 24.
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
Default profile
●
activated each time you connect a certain
compatible enhancement to your device.
Automatic answer
●
device to answer an incoming call automatically
after 5 seconds. If the ringing type is set to
once or Silent, automatic answer is disabled.
Lights — Set whether lights remain on after the
●
time-out.

Security settings

Phone and SIM

Press , and select
Security Phone and SIM card
>
following:
PIN code request
●
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
PIN code, PIN2 code, and
●
>
change the PIN code, PIN2 code, and lock code.
See "Display
— Set the profile that you want
— Select whether you want the
Tools Settings General
> >
and from the
— When active, the code is
Lock code — You can
Beep
>
145