Capture Images In A Sequence; You In The Picture-Self-Timer - Nokia N78 Manual Del Usuario

each scene have been set according to a certain style
or environment.
The default scene in the image mode is Auto, and in
the video mode Automatic
To change the scene, in the active toolbar, select
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to
Options > Change. In the user defined scene you can
adjust different lighting and colour settings. To copy
the settings of another scene, select
mode and the desired scene. To save the changes and
return to the scenes list, press Back. To activate your
own scene, scroll to
and select Select.

Capture images in a sequence

The sequence mode is available only in the main
camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar,
select Sequence mode.
To start capturing images in a quick sequence,
selectBurst, and press and hold the capture key. The
device captures images until you release the key or
until the memory runs out. If you press the capture key
64
briefly, the device captures six image in a sequence.
(both indicated with
User defined, and select
Based on scene
User defined, press the scroll key,
To capture two or more images in defined intervals,
select the desired time interval. To capture the images,
press the capture key. To stop capturing images, select
Cancel. The number of images taken depends on the
).
available memory.
Scene
The captured images are shown in a grid on the display.
To view an image, press the scroll key. If you used a
time interval, only the last captured image is shown on
the display.
You can also use the sequence mode with the self-
timer.
To return to the sequence mode viewfinder, press the
capture key.
To switch off the sequence mode, in the active toolbar,
select Sequence mode
You in the picture—self-timer
The self-timer is available only in the main camera. Use
the self-timer to delay the capture so that you can
include yourself in the picture.
To set the self-timer delay, in the active toolbar, select
Self timer 2
>
To activate the self-timer, select Activate. The device
beeps when the timer is running and the quadrangle
blinks just before the image capture. The camera takes
the picture after the selected delay elapses.
Single shot.
>
seconds, 10 seconds, or 20 seconds.